Table of Contents
Advertisement
3-4 Settings and Adjustments
No.
Item
(1)
RGB display
area
(2)
Gain
adjustments
(3)
Phase level
(4)
Display Channel
(5)
Position
Configuration
(6)
Write
3-26
Does not display RGB images. Click the RGB Button in the
Select Input ch field to switch to full-screen RGB display.
Adjusts the gain of the individual R, G, and B signals in
image data from the RGB input connector on the RGB and
Video Input Unit.
The adjustments are as follows:
<<: -10
<: -1
>: +1
>>: +10
Finely adjusts the image signal from the RGB input
connector on the RGB and Video Input Unit. Overall
sharpness of the RGB image may be improved by adjusting
this level.
Selects the input channel on the RGB and Video Input Unit
that will be adjusted.
1 ch: Video input connector channel 1 (Video Configuration
is accessed.)
2 ch: Video input connector channel 2 (Video Configuration
is accessed.)
RGB: Analog RGB input connector
The display position of the RGB image can be moved
horizontally and vertically one dot at a time up to 15 dots in
any one direction. Adjust the display position when
necessary.
Saves image quality adjustments. Previous settings will
remain if the PT is restarted without clicking the Write
Button.
(1)
Contents
(5)
(2)
(3)
(4)
(6)
Advertisement
Table of Contents
