Table of Contents
Advertisement
3-1 Display
Switching from an NS-CA002 RGB and Video Input Unit to an NS-CA001
Video Input Unit
Component
Video display
Command
buttons/
Multifunction
Objects
Reference
3-14
Properties
---
Video Control –
RGB Color
Contrast
Value
Adjustment
Video Control –
Signal type
Vision Sensor
Console Output
Other
If Video Control – Video Capture is selected as the function in the
Command Button or Multifunction Object properties, you can select
only Upper left or No split screen when the Video Board field setting is
changed.
When you switch the Video Input Unit to the RGB and Video Input Unit
and try to use the Command Button or Multifunction Object to capture
an image, the capture Command Button or Multifunction Object will not
function if Lower left is selected, for example.
Confirm that all Command Buttons and Multifunction Objects set for
video controls operate correctly whenever you change the Video Board
field setting.
Changes
All video display objects are deleted.
If RGB gain adjustment is set, the Function
field will change to None.
If a function key (F1 to F9) is set, the Function
field will change to None.
No change
Advertisement
Table of Contents
