Table of Contents
Advertisement
3-1 Display
•
Creating New Projects
Set the System Version field to version 5.1 or higher in the New Project Dialog
Box.
•
Opening Existing Projects
A project with screen data that was edited or saved using CX-Designer Ver.
5.0 or earlier must be converted to System Ver. 5.1 or later. Select version 5.1
or latter under the Tools – Convert – Version Menu.
4. Select the RGB and Video Input Unit.
(1) Select PT – System Setting on the CX-Designer.
(2) Select the Video Tab from the System Setting Dialog Box.
(3) Set the Video Board field to RGB/Video Input Unit with 2 channels
(NS-CA002), and click the OK Button.
Reference
5. Create an RGB display.
Create a video display object on the screen to display the RGB image.
(1) Select Functional Objects – Video Display or select the
CX-Designer.
(2) Place the video display object on the screen. The size and position of the
object is not important at this time.
(3) Select the input that will be displayed to RGB.
Set the Select Input ch field to RGB in the Properties Setting Dialog Box
from the Video Display Window.
3-10
Observe the following precautions when changing the Video Board field
setting.
If the Video Board field is changed with a video display object already
on the screen, the control object on the screen will be converted or will
be deleted.
Check to see if all video display objects and Command Buttons in the
project operate correctly with the Video Input Unit you selected when
you changed the Video Board field setting.
Refer to 3-1-3 Changing the Video Board Field Setting for details.
Icon on the
Advertisement
Table of Contents
