Table of Contents
Advertisement
3-1 Display
5. Set the video input method.
(1) Select PT – System Setting on the CX-Designer.
(2) Select the Video Tab from the System Setting Dialog Box.
(3) Set the Video Input Method and click the OK Button.
Reference
6. Create a video display.
Create a video display object on the screen to display video images.
(1) Select Functional Objects – Video Display or select the
CX-Designer.
(2) Place the video display object on the screen. The size and position of the
object can be adjusted at this time, or they can be changed later from the
Property Setting Dialog Box.
(3) Select the channel of the video port that will be displayed.
Select the video input channel where a video camera, Vision Sensor, or other
input device is connected. Set the channel in the Select Input ch field in the
Properties Setting Dialog Box from the Video Display Window.
Reference
7. Transfer the newly created screen data to the NS-V1/V2 PT.
Save the newly created screen data, and then transfer it to the PT. Refer to
Transferring Data to the PT in the CX-Designer's online help for details.
Reference
3-4
The NTSC/PAL setting is the same for all video input ports. A video
camera and Vision Sensor connected to the Unit at the same time
cannot be set individually to NTSC or PAL.
• When the RGB and Video Input Unit (NS-CA002) is selected, pop-up
screens and keypads may be displayed on the video display.
• The video display object and other functional objects are organized in
the order they were opened. This may place functional objects on top of
the video display object.
• A video display object can be any size up to 640 x 480 dots (W x H).
• A video display object cannot be placed with all or part of it off the
screen.
• Video display objects can be placed on normal (base) screens only.
They cannot be placed on pop-up screens, sheets, or frames.
• Only one video display object can be placed on a screen at a time.
• Video displays cannot be performed on the NS5-V1/V2. Do not
transfer screen data containing video images to a NS5-V1/V2PT.
• You can install the NS-CA002 RGB/Video Input Unit on an NS15-V2
PT, but you cannot use the video display function.
Icon on the
Advertisement
Table of Contents
