Table of Contents
Advertisement
Appendix 1 Specifications
Appendix 1 Specifications
A-1-1 General Specifications
Item
Dimensions
Weight
Ambient operating temperature
Ambient storage temperature
Ambient operating humidity
Rated power supply voltage
Operating atmosphere
Vibration resistance
Shock resistance
A-1-2 General Specifications
External Interface Specifications
Item
Video input
Analog RGB input
Console output
Expansion interface
Video Input Specifications
Item
Input system
Scanning system (See note.)
Input signal
Signal input connector
Note: The NS-series PTs do not support progressive scanning (i.e., non-interlaced scanning).
Analog RGB Input Specifications
Item
Display resolution
(No. of dots)
Horizontal frequency
Vertical frequency
Signal input connector
Input synchronization signal
Input picture signal
* Be sure to change the resolution and frequency to levels that can be displayed on the PT before
connecting the PT to a personal computer or other devices.
A-2
150 x 102 x 22 mm (W x H x D)
0.5 kg max.
If the Unit is mounted at an angle between 0º and 30º to the
horizontal: 0 to 40ºC
If the Unit is mounted at an angle between 30º and 90º to the
horizontal: 0 to 50ºC
−20 to 60°C
35% to 85% (with no condensation)
Power supplied from the PT's expansion interface connector (5
V ±5%, 3.3 V ±5%)
No corrosive gases.
Same as PT.
Same as PT.
2 ports
1 port
1 port
1 port (for the PT's expansion interface connector)
NTSC (RS-170A compliant) or PAL
Interlaced
1.0 V p-p 75 Ω
BNC connector
640 × 480
(Mounted to the
NS10 or NS8)
31.5 kHz
60 Hz
D-Sub,15-pin
Separate, TTL, positive/negative polarity
Analog, positive polarity (0.7 Vp-p/75)
Specifications
Specification
Specifications
Specification
800 × 600
1024 × 768
(Mounted to the
(Mounted on the
NS12)
NS15)
37.5 kHz
48.4 kHz
Advertisement
Table of Contents
