Communications Data; List Of Fins-Mini Command Services - Omron EJ1 User Manual

FINS-mini Text
6-3-4

Communications Data

Setting (monitor) value
Hexadecimal
Note
6-3-5

List of FINS-mini Command Services

Note
Communications data
(See note.)
Double word (8 digits)
Word (4 digits)
Refer to Parameter List on page 233.
For details on each service, refer to 6-4 Detailed Description of Services.
MRC SRC Name of service
01 01 Read from variable
area
01 02 Write to variable
area
01 04 Composite read
from variable area
01 13 Composite write to
variable area
01 10 Composite registra-
tion read
01 11 Composite read reg-
istration
01 12 Composite read reg-
istration confirma-
tion
05 03 Controller attribute
read
06 01 Controller status
read
08 01 Echoback test
30 05 Operation com-
mands
G3ZA set values can be read from the Basic Unit connected to the G3ZA. The
Basic Unit has variables for use with the G3ZA. The G3ZA set values can be
read and written by reading and writing these variables.
Negative values
2's complement The decimal point is removed and the result is
converted to hexadecimal.
Example: 105.0
Processing
Reads a set value.
Writes a set value.
Reads more than one non-con-
secutive set value.
Writes more than one non-con-
secutive set value.
Reads in order the contents of
addresses specified for compos-
ite read registration of set val-
ues.
Specifies the addresses to be
read for a composite read of set
values.
Reads the contents of the regis-
tration for composite read of set
values.
Reads the model and communi-
cations buffer size.
Reads the operating status.
Performs an echoback test.
Executes RUN/STOP, AT exe-
cute/AT cancel, and other opera-
tions.
Section 6-3
Decimal point
1050 0000041A (8 digits)
105.0 1050 041A
TC4/TC2
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
Supported Supported
(4 digits)
HFU
173