Omron EJ1 User Manual page 50

Wiring Terminals
1
CN1
2
TC4/2
Connecting to the G3PW Power Controller
Connect the black line with a white stripe
to terminal 1 on the G3ZA and the black
line with no stripe to terminal 2.
EJ1-CBLA050 (order separately)
(cable length: 5 m)
Use a JST Mfg. Co. Ltd. PA connector.
Housings
B ( )
Crimp Terminals
A ( )
Use an EJ1-CBLA050 Cable (manufactured by OMRON).
The EJ1 contains 120
resistor (110 to 125 , 1/2 W) only to the end G3ZA node.
Set the baud rate to 57.6 kbps
(default value) using key
operations. For details, refer to
the G3PW Operation Manual.
Model: PAP-02V-S
Model: SPHD-001T-P0.5
of terminating resistance. Connect a terminating
Section 2-2
25