Omron EJ1 User Manual page 224

Detailed Description of Services
Note
Operation command
RUN
STOP
Manual
Auto
40% AT Execute
100% AT Execute
AT Cancel
Bank 0 Change
Bank 1 Change
Bank 2 Change
Bank 3 Change
Local SP Change
Remote SP Change
Reset Error
Alarm 1 Latch Cancel
Alarm 2 Latch Cancel
Alarm 3 Latch Cancel
All Alarm Latch Cancel
Save RAM Data (See note 1.) 37
Set value initialization (See
note 2.)
V1.2
Save RAM Data 2 (See note
3.)
V1.2
Register Unit Configuration
(1) Set values that can be changed during operation are saved to EEPROM.
• Descriptions of and Precautions for Operation Commands
Refer to Description of Operation Commands and Precautions on
page 185
(2) Performing set value initialization will initialize the port B communications
protocol to 0: CompoWay/F. If you do not want to change the protocol,
turn ON No. 3 of SW2. The protocol will be set to Modbus regardless of
the port B communications protocol setting.
(3) All set values are saved in non-volatile memory (EEPROM).
Command code TC related information
0A 00: Channel 1
01: Channel 2
0B
02: Channel 3
0C
03: Channel 4
0D
FF: All channels
0E
0F
10
1E
1F
20
21
22
23
2D Always 00.
32 00: Channel 1
01: Channel 2
33
02: Channel 3
34
03: Channel 4
35
FF: All channels
Always FF.
38 Always 00
39 Always FF
3B 00: Reset
01: Register
Section 7-5
199