Omron EJ1 User Manual page 178

Programless Communications
No.12 to 15
CH4 CH3
No.16 to 19
CH4 CH3
No.20 to 23
CH4 CH3
No.24 to 27
CH4 CH3
No.28 to 31
CH4 CH3
Note
No.15 No.14
CH2 CH1 CH4 CH3
No.19 No.18
CH2 CH1 CH4 CH3
No.23 No.22
CH2 CH1 CH4 CH3
No.27 No.26
CH2 CH1 CH4 CH3
No.31 No.30
CH2 CH1 CH4 CH3
Parameter
RUN/STOP
AT Execute/Cancel
Auto/Manual
(1) When allocating the above parameters in the Programless Download
Setting, be sure to allocate RUN/STOP and Auto/Manual before allocat-
ing AT Execute/Cancel. If AT Execute/Cancel is allocated before the oth-
ers, AT Execute cannot be executed simultaneously with RUN or Auto.
(2) Even if AT execution has finished or been canceled, the bit that was
turned ON with AT Execute/Cancel will not turn OFF automatically. If the
bit is left ON, AT may start unexpectedly, such as during a system reboot,
so make sure to turn OFF the bit when AT finishes or is canceled. The
status while AT is executing can be checked using the channel status bit
2 (AT Execute/Cancel).
No.13
CH2 CH1 CH4 CH3 CH2
No.17
CH2 CH1 CH4 CH3 CH2
No.21
CH2 CH1 CH4 CH3 CH2
No.25
CH2 CH1 CH4 CH3 CH2
No.29
CH2 CH1 CH4 CH3 CH2
Bit
ON
OFF
ON
OFF
ON
OFF
Section 5-1
No.12
CH1 CH4 CH3 CH2
No.16
CH1 CH4 CH3 CH2
No.20
CH1 CH4 CH3 CH2
No.24
CH1 CH4 CH3 CH2
No.28
CH1 CH4 CH3 CH2
Executed operation command
RUN
STOP
100% AT Execute
AT Cancel
Switch to Manual Mode
Switch to Auto Mode
CH1
CH1
CH1
CH1
CH1
153