Table of Contents
Advertisement
Setting Alarm Specifications
Note
Note
5-4-8
Channel Alarm Status
The alarm type is set to 1 (Upper and lower limit).
Variable type
E3/A3
Alarm 1 to 3 SP Selection
Conditions for use
The alarm type must be set to a deviation alarm and the SP
Ramp function must be enabled.
This parameter can be set only when operation is stopped.
The alarm status can be monitored.
Variable type
C4/84
Channel Alarm Status
Conditions for use
The alarm type must not be set to 0.
Parameter name
(Channel)
Parameter name
Refer to Channel Alarm
(Channel)
Status on page 205.
Section 5-4
Setting range Default
0: Ramping SP
0
1: SP
Setting range
Default
---
87
Advertisement
Chapters
Table of Contents
