Omron EJ1G User Manual page 125

Programless Communications
Note
Set value Area
0 (default) DM
1
2
3
4
5
6
7
8
9
10
11
12
13
Note
104
Programless Communications Protocol (Variable Type: F0/B0)
Used to set the programless communications protocol.
Variable type
F0/B0 Programless Communica-
tions Protocol
Conditions for use No special conditions
Reset the EJ1G to enable settings.
Programless Communications Upload/Download Data Area (Variable
Type: F0/B0)
Used to set the area in PLC memory that will be allocated to the parameters
set with the Programless Upload/Download Settings. Set this parameter
according to the Programless Communications Protocol.
• SYSMAC CS/CJ Series PLCs
CJ1H-CPU67H CJ1H-CPU66H CJ1H-CPU65H
Applicable Applicable
EM0 Applicable Applicable
EM1 Applicable Applicable
EM2 Applicable Applicable
EM3 Applicable Applicable
EM4 Applicable Applicable
EM5 Applicable Applicable
EM6 Applicable Applicable
EM7 Applicable ---
EM8 Applicable ---
EM9 Applicable ---
EMA Applicable ---
EMB Applicable ---
EMC Applicable ---
• MELSEC-Q/QnAS Series PLCs
Set value
0 (default) Data registers (D)
1 Link registers (W)
2 File registers (R)
(1) Make the programless upload settings in the Programless Communica-
tions Upload Data Area and the programless download settings in the
Programless Download Data Area.
(2) Reset the EJ1G to enable settings.
Parameter name
0: Not used.
(Common)
1: Not used.
2: NT Link (1:N)
3: Not used.
4: Not used.
5: MC protocol (format 5)
Applicable areas by CPU Unit
CJ1G-CPU45H
Applicable
Applicable
Applicable
Applicable
---
---
---
---
---
---
---
---
---
---
Area
Section 5-6
Setting/Monitor values
Connectable PLCs:
SYSMAC CS/CJ Series
Connectable PLCs:
MELSEC-Q/QnAS Series
CJ1G -CPU44H CJ1M
-CPU43H
-CPU42H
Applicable Applicable
Applicable ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
Default
2