Omron EJ1G User Manual page 220

Status Lists
Configuration Error A Status
Bit position Status
Bit 0 Undefined Expand
Units.
Bit 1 No Basic Unit
Bit 2 Too Many Basic Units
Bit 3 Not used.
Bit 4 Basic Unit Connection
Fault
Bit 5 Basic Unit Startup Error No error
Bit 6 Not used.
Bit 7 Not used.
Bit 8 Illegal Unit Arrangement No error
Bit 9 Not used.
Bit 10 Not used.
Bit 11 Not used.
Bit 12 Illegal Restart Error
Bit 13 Invalid Registration
Error
Bit 14 Control Group Setting
Error
Bit 15 Not used.
Configuration Error B Status
Bit position Status
Bit 0 Basic Unit 1 Error
Bit 1 Basic Unit 2 Error
Bit 2 Basic Unit 3 Error
Bit 3 Basic Unit 4 Error
Bit 4 Basic Unit 5 Error
Bit 5 Basic Unit 6 Error
Bit 6 Basic Unit 7 Error
Bit 7 Basic Unit 8 Error
Bit 8 Basic Unit 9 Error
Bit 9 Basic Unit 10 Error
Bit 10 Basic Unit 11 Error
Bit 11 Basic Unit 12 Error
Bit 12 Basic Unit 13 Error
Bit 13 Basic Unit 14 Error
Bit 14 Basic Unit 15 Error
Bit 15 Basic Unit 16 Error
Bit description
0 1
No error Error
No error Error
No error Error
No error Error
Error
Error
No error Error
No error Error
No error Error
Bit description
0 1
No error Error
No error Error
No error Error
No error Error
No error Error
No error Error
No error Error
No error Error
No error Error
No error Error
No error Error
No error Error
No error Error
No error Error
No error Error
No error Error
Meaning
A Unit that is not recoginized is connected.
No Basic Units are registered and no TC4/TC2
Units are connected.
More than 16 TC4/TC2 Units are connected.
The configuration has been registered, but the reg-
istered TC4/TC2 Units cannot recoginized.
A configuration error has occurred for the TC4/TC2
Units.
A Unit is connected to the left of the HFU.
Only the HFU was reset during operation.
The configuration registered without any TC4/TC2
Units.
There is an error in the group settings.
Meaning
An error occurred in a TC2 or TC4 Unit after the
configuration was registered.
Appendix
C4/84 0002
C4/84 0003
199