Revision History - Omron DEVICENET SAFETY - 03-2008 Operation Manual

The manual revision is indicated at the end of the Cat. No. printed at the lower left of back cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code
1 April 2005
02 February 2006
03 June 2007
04 March 2008

Revision History

Cat. No. Z904-E1-04
Date
First edition
Page 9: Precautions added.
Pages 9 and 5-12: Information added on isolating transformers.
Pages 3-7 and 3-8: Information added on I/O data supported by Safety I/O Termi-
nals.
Page 5-9: Changes made to safety output specifications.
Page 6-2: Changes made to indicators and error processing table.
Pages 6-3 to 6-5: Changes made to troubleshooting tables.
Pages 6-6 and 6-7: Changes made to error history table.
Revised to add information on DST-XD0808SL-1 and corrected mistakes.
Page xx: Added precaution.
Page xxi: Updated regulations and standards and removed note.
Page 7: Changed definition of "contact operation counters."
Page 17: Added new material on DST-XD0808SL-1 and parameters that can be set
and deleted previous material.
Page 41: Added crimping tool model.
Page 53: Changed "SAFE" and "NON-SAFE" designations in table.
Pages 55 to 58: Changed description of default values.
Pages 77, 80, 84, and 89: Changed "DRAIN" to "Shield" in circuit diagrams.
Page 83: Removed specification for the rated load for an inductive load.
Page 94: Added information for the DST-XD0808SL-1.
Pages 97 to 99: Changed error names and responses.
Revision code
Revised content
121