Preparations For Installation - Omron CX-DESIGNER V2.1 - 07-2007 User Manual

Table of Contents

Advertisement

Preparations for Installation

2-1
Preparations for Installation
System Requirements
Item
Operating system
Microsoft Win-
(OS) (See note 1.)
dows 98SE or
Japanese or
Me
English system
Computer
IBM PC/AT or compatible with a Pentium II 333 MHz or faster proces-
sor
(Pentium III 1 GHz or faster recommended.)
Memory
256 MB minimum
Hard disk
Approx. 700 MB or more available space is required to install.
SVGA (800 × 600) or better high-resolution display with 256 colors min.
Display
Disk drive
CD-ROM drive
Communications
1 port minimum, either RS-232C or USB (See note 2.)
ports
Other
Internet access is required for online user registration, including a modem or other hardware con-
nection method.
12
Check to be sure that the following system requirements have been met
before installing the CX-Designer.
The system requirements for the CX-Designer are given in the following table.
Microsoft Win-
Microsoft Win-
dows NT (Ser-
dows 2000 (Ser-
vice Pack 6a)
vice Pack 3 or
higher)
(1) CX-Designer Operating System Precaution
The CX-Designer will not run on Microsoft Windows 95 or any other OS
not listed above. If such an OS is being used on the client computer, the
OS must be upgraded before installing the CX-Designer. System require-
ments and hard disk space may vary with the system environment.
(2) An RS-232C or USB port is required for connecting to the NS-series PT.
When Windows NT4.0 is used, however, data cannot be transferred via
the USB port.
(3) The following restrictions apply when using CX-Designer version 2.1 with
Microsoft Windows Vista.
Some help files cannot be referenced.
Help files can be referenced if the help program (WinHlp32.exe) for Win-
dows Vista (distributed by Microsoft Corporation) is imported. For details,
either refer to the Microsoft home page below or contact Microsoft Cor-
poration. (When connected online, the download page is displayed auto-
matically by opening the help file.)
http://support.microsoft.com/kb/917607/en
Requirement
Microsoft Win-
dows XP
Section 2-1
Microsoft Windows Vista
(except for 64-bit edition)
(See note 3.)
IBM AT-compatible per-
sonal computer with the
processor recommended
by Microsoft.
A minimum of 1 GHz is rec-
ommended.
A minimum of 1 GB of
memory is required, and a
minimum of 1.5 GB is rec-
ommended.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ns-cxdc1-v2Cx-designer 2.1Ns series

Table of Contents