Omron CX-DESIGNER V2.1 - 07-2007 User Manual page 99

Using Machine Navigator
80
c. Click the OK Button to close the Alarm/Event Details Dialog Box.
d. Make the settings related to HOST1:100.01 in the same way, but in this
case set Contents No. to 2.
e. Click the OK Button to close the Alarm/Event Details Dialog Box.
f. Click the OK Button to close the Alarm/Event Setting Dialog Box.
7. The settings are now complete. Transfer the project data to the NS-series
PT.
Section 4-20
1. Set HOST1:100.00.
2. Set screen 100.
3. Select this checkbox.
4. Set to 1.
5. Select this checkbox.
1. Set HOST1:100.01.
2. Set screen 100.
3. Select this checkbox.
4. Set to 2.
5. Select this checkbox.