Omron CJ - 10-2005 Manual page 73

I/O Table Operations
Confirming Rack First
Word Settings
1,2,3...
With a CS1-H or CJ1-H CPU Unit, the Programming Console can be used to
check whether or not the first word has been set on a Rack. Use the following
procedure.
1. Press the FUN, SHIFT, and CH Keys to start the I/O table creation opera-
tion. If the first word for a Rack has been set, a message saying so will ap-
pear on the second line of the display.
FUN
If nothing is displayed, then the first word has not been set.
2. Press the CHG Key, enter the password (9713), and then press the
WRITE Key to continue creating the I/O tables, or press the CLR Key to
cancel the operation and return to the initial display.
Note Detailed Information on I/O Table Creation Errors
The CS1-H and CJ1-H CPU Units will provide detailed information on errors
that occur when creating I/O tables. For example, with a CS1-H CPU Unit, the
contents of A261 will provide information on the Unit causing the error when-
ever one occurs when creating the I/O tables from the Programming Console.
For details, refer to the troubleshooting section in the CS Series
Programmable Controllers Operation Manual or CJ Series Programmable
Controllers Operation Manual.
000000 CT00
CLR
000000I/O TBL ?
CH
SHIFT
*DM Rack 1st Word En
Section 3-7
47