Omron CJ - 10-2005 Manual page 114

I/O Multipoint Monitor
Saving I/O Multipoint Monitor Results
Key Sequence
Operation Example
1,2,3...
88
c) Specify D000000 and the present value will appear at the top of the
display.
EM
DM
d) Specify CIO 1225 and the present value will appear at the top of the
display.
5
2 2
1
• A total of up to 4 bits and words can be specified, but only a maximum of
2 of these will be displayed at any one time. If more than 4 bits/words are
specified, old ones will be cleared from the monitor operation.
2. Press the MON Key to display bits and words that were not visible.
3. Press the CLR Key and bit/word being monitored on the top line will be
cleared from monitor operation.
This operation is used to save the current bits/words specified for the I/O Mul-
tipoint Monitor operation while performing other operations.
Saving I/O Multipoint Monitor results:
Returning to I/O Multipoint Monitor:
1. From the I/O Multipoint Monitor display, press the SHIFT then CLR Keys to
return to the initial display.
SHIFT
D00000
MON
000001
The present value
for D 00000.
The present value
for 000001.
1225
MON
D00000
The present
value for 1225.
The present value
for D 00000.
T0001
MON
1225
1225
CLR
D00000
I/O Multipoint Monitor display
MON
SHIFT
1225
D00000
000000
CLR
WORD
Section 5-3
1234
^ OFF
0000
1234
0100
0000
0000
1234
SHIFT CLR
0000
1234
1225