Omron CJ - 10-2005 Manual page 35

Functions and Nomenclature
Mode Switch
Display Contrast
Buzzer Volume
The mode switch key can be removed from the switch when the switch is in
RUN or MONITOR modes. It cannot be removed when in PROGRAM mode.
f
f
MONITOR
RUN
The contrast of the liquid crystal display can be adjusted using the knob on
the right of the display.
With the C200H-PRO27-E Programming Console, the buzzer volume can be
adjusted using the lever on the right-hand side of the Console. The CQM1H-
PRO01-E and CQM1-PRO01-E does not have buzzer volume control.
C200H-PRO27-E
Programming
Console
Refer to 3-5 Buzzer Operation for further information on adjusting the buzzer
volume.
✕
PROGRAM
f: Key can be removed
✕: Key cannot be removed
Contrast adjustment knob
Buzzer volume minimum
Buzzer volume maximum
Section 1-5
9