Omron CJ - 10-2005 Manual page 109

Simple I/O Monitor
Monitoring Timer/Counter Completion Flags and PVs
Key Sequence
Type Key sequence
Clock
CF
pulse/Con-
SHIFT
SRCH
dition Flag
When clock pulses or Condition Flags
are designated, the bits listed at the
right can be designated, by using the
Up and Down Keys.
Task Flag
TK
SHIFT
CNT
Set value input range
#0000 to #9999
Example: When the present value is 10 s, the values are as follows:
Set value input range
#0100
Timer number
TIM
TK
Counter number
CNT
Always ON Flag
000000
BIT
TK0000
Number
000000
BIT
Simple I/O Monitor present value display
0000 to 9999
Simple I/O Monitor present value display
0100
MON
MON
Section 5-2
Display example
Display Bit
ON Always ON Flag
OFF Always OFF Flag
AER Access Error Flag
0.02s 0.02-s clock pulse
0.1s 0.1-s clock pulse
0.2s 0.2-s clock pulse
1s 1-s clock pulse
1min 1-min clock pulse
ER Error Flag
CY Carry Flag
> Greater Than Flag
= Equals Flag
< Less Than Flag
N Negative Flag
OF Overflow Flag
UF Underflow Flag
>= Greater Than or Equals Flag
<> Not Equal Flag
<= Less Than or Equals Flag
TK0000
(initial status)
(initial status)
ON
83