Omron CJ - 10-2005 Manual page 178

PLC Setup Coding Sheets for Programming Console
152
Address
127 @@@@
(CS1D Duplex-CPU Systems only)
Value (Hex)
0000
5AA5
Address
128@@@@
Value (Hex)
C000
8000
4000
0000
Note Interrupt task error detection cannot be set
for CS1D Duplex-CPU Systems.
Address
(CS1-H/CJ1-H/CS1D CPU Units only)
129 @@@@
Value (Hex)
8000
0000
Address
130 @@@@
(CS1D Duplex-CPU Systems only)
Not used.
Value (Hex)
0
8
Address
136@@@@
Value (Hex)
0000
0080
0081
to
008C
Standby CPU Unit RS-232C port
setting
Disable use of RS-232C port on
standby CPU Unit.
Enable use of RS-232C port on
standby CPU Unit.
Detect Low Battery Detect Interrupt
Task Error
Do not detect. Do not detect.
Do not detect. Detect.
Detect. Do not detect.
Detect. Detect.
Error History Storage of FAL
Do not store FAL in error history.
Store FAL in error history.
Duplex Memory Card settings
Disabled.
Duplex Memory Card check enabled.
EM file memory settings
None
EM File Memory Enabled: Bank No. 0
EM File Memory Enabled: Bank No. 1
EM File Memory Enabled: Bank No. C
Appendix C