Multi View - Datavideo HS-4000 Instruction Manual

Step 4: You are allowed to change the device name in the Host Name field and modify the
device's network settings accordingly. Click the Save button to confirm the change. To reset,
simply click the Default button.

2.3 Multi View

The HS-4000 Multi view output can be supplied from the HDMI or SDI outputs, see Chapter
5 (5.6) for configuring the outputs. The Multi view shows monitoring images for Preview
(PVW), Program (PGM) and Inputs 1~8. The Multi view can also show audio level bars
overlaid on the Program image. This confirms that the analogue XLR audio input is being
received and embedded to the selected Program output(s). The HS-4000 also has a
proprietary Multi-view port which is an HDMI connector on the rear panel, delivering the
multi-view screen to the connected HDMI monitor (not supplied).
The layout of the multi view can also be changed. The sources can be swapped around using
the cross point function (See cross point of the Inputs menu for details). For each setup,
embedded audio level indication is available on the Preview and Program windows.
There are six different multi-view layouts available on the HS-4000. See Multiviewer in
Section 5.6 for setup instructions.
Note: A Red tally indication box will be shown around the sources selected for Program OUT
and these selected sources should be displayed at the switcher's selected Program output(s).
A Green tally indication box is shown around the sources selected for Preview. These are the
next image sources to be mixed to, wiped in or cut to the Program OUT depending on the
user's preference.
37