Hdmi Multi-View; How To Change The Multi-View Output - Datavideo SE-2800 Instruction Manual

HDMI Multi-view

SE-2800 Multi-view monitoring is available across one or two HDMI monitors (not supplied). These HDMI outputs
can be used to monitor video and audio in a number of different configurations. For each set up, embedded audio
level indication is also available on all inputs as well as the Preview and Program windows.
This Multi-view is supplied from the HDMI connection(s) on the rear panel. (See page 8, Rear Panel, item 17.)
When connected to two compatible HDMI monitors a variety of multi-image layouts is possible.
Configuration A:
￭ On HDMI screen 1: 9 live inputs
￭ On HDMI screen 2: 3 live inputs with additional Preview and Program windows
Configuration B:
￭ On HDMI screen 1: 12 live inputs with additional Preview and Program windows
￭ On HDMI screen 2: Program window
Configuration C:
￭ On HDMI screen 1: 8 live inputs with additional Preview and Program windows
￭ On HDMI screen 2: Program window
Configuration D:
￭ On HDMI screen 1: 12 live inputs with additional Preview and Program windows
￭ On HDMI screen 2: Same as HDMI screen 1
Configuration E:
￭ On HDMI screen 1: 8 live inputs with additional Preview and Program windows
￭ On HDMI screen 2: Same as HDMI screen 1
HTMI1
PST PGM
A
PST PGM
B
PST PGM
C
PST PGM
D
PST PGM
E
HTMI2
PROGRAM
PROGRAM
PST PGM
PST PGM
Shown left are the five multi-view configuration
options A to E.

How to change the Multi-view output

To change the multi-view option on your switcher
press the ENTER button in the MENU area of
the SE-2800 Control Panel / Keyboard. This will
display an on screen menu on HDMI output 1.
Then use the arrow down button to highlight the
option Multi Screen Mode. Use the arrow keys
to highlight your preferred option from those
shown on the left. Use the arrow keys to place a
tick in the selection box and then press ENTER to
save this choice.
On screen Tally indication
The SE-2800 Multi-Image Preview supplies basic
tally information by highlighting the live Program
input source with a red border, and the cued next
input source with a yellow border.
Function Area
Below the Program and Preset image windows
is a function area occupied by a real time Clock,
Countdown Timer (if active), chosen Wipe
indicator, PC or Console control indication and
chosen Audio mix and Audio level indicators.
Labels
Below each video input channel window there
is a label. These labels can be edited using the
software supplied with the SE-2800, see page 23
for more details.
SE-2800
INSTRUCTION MANUAL 11