Picture-In-Picture; Assigning A Video Source To A Pip Window - Datavideo HS-4000 Instruction Manual

Picture-In-Picture

In this example, we are supplying the HS-4000 with an HD-SDI live video signal to input 2;
this is selected on the Program row. We have also assigned a STILL image to input 6. This still
image, selected on the
Note: See Still of Section 5.8
Picture-In-Picture images on the output image, you should first set these KEYER keys to PIP
mode.

Assigning a video source to a PIP window

On the Keyer menu you can assign a selected input to the chosen PIP video layer.
1. Open the Keyer menu to select Keyer 1 and in the Keyer Ctrl sub menu, set Key 1 to the
desired key mode (Luma, Chroma and Linear) and PIP mode as shown below.
Keyer sub menu, will be displayed in the PIP window.
for assigning a STILL image to input 6.
On the HS-4000's control panel, there are
eight KEYER keys. These are labelled
Program and Preview. The upper KEYER
keys relate to activating Picture-In-Picture
images on the Program outputs. The
lower KEYER keys relate to activating
Picture-In-Picture images on the Multi-
view or Preview outputs. Before activating
121