Table of Contents
Advertisement
SE-700 Multi view
The SE-700 Multi view output can be supplied from the HDMI or SDI outputs, see previous page. The layout of the
multi view cannot be changed. The sources can be swapped around using the cross point section of the Inputs
menu.
The Multi view shows monitoring images for Preview (PVW), Program (PGM), Inputs 1~4, Still and Freeze channels
as well as SDI outputs 1 and 2.
The Multi view can also show audio level bars overlaid on the Program image. This confirms the analogue XLR
audio input is being received and embedded to the selected Program output(s).
A Red tally indication box is shown around the selected Program source. This video image is also seen at the
switchers selected Program output(s). A Green tally indication box is shown around the selected Preview source.
This will be the image source to be mixed to, wiped in or cut to next depending on the user's preference.
STILL image is an image pre-loaded from one of the SE-700's frame stores (FS1, FS2 or FS3). See the Frame Stores
section for more information.
FREEZE image is a frozen image taken immediately from one of the SE-700's four live input channels or
alternatively from one of the possible 500 pre-loaded memory points.
Images SDI out 1 and SDI out 2 confirm what is being sent from those SDI outputs. These outputs can be
configured differently by the user, see previous page.
14
Advertisement
Table of Contents
