Static Ip; Static Ip Address; Web User Interface - Datavideo HS-4000 Instruction Manual

Static IP

With DHCP disabled, the NVS-32 will not be assigned an IP address upon connection to a DHCP
server. As such it is recommended that you manually assign a static IP address to the device.

Static IP Address

Static IP is primarily used in point-to-point connection, allowing you to access the NVS-32
directly from the PC. To assign a static IP address to the NVS-32, please follow the steps
outlined below:
1. Connect the NVS-32's LAN/DVIP port to a DHCP server via an Ethernet cable.
2. Turn on the HS-4000's power and the NVS-32 will also be turned ON in the
DHCP mode by default.
3. Search for the NVS-32 device according to the method as detailed in the previous DHCP
section. Once found, log in to the user interface on the web browser.
4. Open the Network page by clicking the "Network" tab.
5. Disable DHCP.
6. You will be allowed to manually enter a static IP address once DHCP is disabled. Depending
on your network configuration, you will also need subnet mask, gateway IP as well as the
DNS information.

9.2 Web User Interface

By now, we have obtained the NVS-32's IP address. Enter it into the address bar of a browser
then hit ENTER. Log in with the user name and password provided below.
User name: admin
Password: admin
143