9.4 Panel Buttons
The START/STOP, BITRATE, RES and MODE buttons on the front panel of the HS-4000 give
the user certain controls of the record and stream functions. In this section, we will cover
operations of these four buttons in detail.
Button and LED Behavior
See the table below for button and LED behavior.
Blinking
White
Solid White
Blinking Red
MODE
N/A
N/A
Push to change
Push to
resolution
switch
according to
operation
the mode
mode.
selected.
N/A
N/A
163
RES
BITRATE
N/A
Push to
switch
between H,
M and L.
N/A
START/STOP
N/A
Push and hold
for at least 2
seconds to start
device
operation.
Error; check the
Message box
for error code.