Table of Contents
Advertisement
Chapter 5
The switcher's GUI menu allows the user to perform several configurations of image effects,
such as Picture-in-Picture, chroma key, subtitle overlay, transition effects, still pictures, etc.
The user can also configure the I/O by selecting different input and output combinations. In
addition, in the setup menu, the user is allowed to adjust the keyboard brightness, set the
menu language, reset the device, customize network settings and upgrade the firmware.
The GUI control buttons are designed for opening the GUI on the built-in 5 inch monitor and
navigating through the sub menus. Press the HOME button to open the Home Menu page or
the sub menu buttons to directly access the corresponding sub menus.
Please note that after pressing the power button on the rear panel while the machine is still
running, you will be prompted on the 5 inch touch screen to confirm the shutdown. Select
YES if you would like to shut down the machine and the last device settings will be
automatically saved before it's turned off.
Main
Sub
Transition
(Duration)
Type
Start
Matte
Wipe Effects
Graphical User Interface
M/E
DSK
FTB
Mix
Wipe
Clip
Luma
Sat
Hue
Wipe
Options and Parameters
Mix Effect (0 - 999 Default: 0)
Downstream Key (0 - 999 Default: 0)
Fade-to-Black (0 - 999 Default: 0)
Default
Background Matte Luma (0 – 100% Default: 0%)
Background Matte Saturation (0 – 100%
Default: 0%)
Background Matte Hue (0 – 359 Default: 0)
Wipe Effect Presets (1 - 32 Default: 1)
54
Advertisement
Table of Contents
