Cut Button; Mix Button; Wipe Button; Stinger Button - Datavideo HS-4000 Instruction Manual

Note: The Stinger transition is currently under development so the function cannot be
used.

CUT Button

The CUT button is used to immediately switch between the currently selected
Program and Preview sources.

MIX Button

The MIX button is selected when a dissolve or fade transition between the
selected Program and Preview sources is required. This MIX transition is
produced by then moving the T-Bar manually or by pressing the AUTO TRANS
button. To configure the mix transition time, open the GUI, then the Start menu, and modify
the M/E value in the Transition sub menu accordingly.
Program View
Before Transition

WIPE Button

The WIPE button is selected when a 2D wipe transition between the selected
Program and Preview sources is required. This WIPE transition effect is produced
by then moving the T-Bar manually or by pressing the AUTO button. Follow the
menu path GUI menu  Start  WIPE Effects  WIPE to select the 2D WIPE style.
Program View
Before Transition

Stinger Button

Press the Stinger button to enable the Stinger transition mode.
The Stinger Transition Effect is basically an animated effect added during
transition of two video sources. The animated effect is generated by a clip file
which consists of a series of sequential files in bmp/jpg/png/pic formats. The Stinger
transition is produced by then moving the T-Bar manually or by pressing the AUTO button.
Note: The Stinger transition is currently under development so the button cannot be used.
Transition in Progress
(MIX Effect)
Transition in Progress
(WIPE Effect)
108
Program View
After Transition
Program View
After Transition