Mode 2 Traps - Paradyne COMSPHERE 6700 Series User Manual

Traps and Report Formats

Mode 2 Traps

3-6
Use Mode 2 traps when the Proxy Agent Interface application is not used. To use
the Proxy Agent Interface application, refer to
The following COMSPHERE 6700 NMS MIB variable bindings are included in
each trap message.
Trap Serial Number (nmsTempSerial)
Device Name (nmsTempName)
System Time (nmsSystemTime)
Table 3-2 identifies Mode 2 (Enhanced Mode) traps that apply to all Paradyne
devices (DSU, Dial, and APL). Not all devices produce all traps; refer to the
device columns. Traps 33–78 and 233–278 are new with Release 2.0.
Traps 101–117 are Dial Security alerts.
NOTE:
Trap numbers 1–32 are reserved for Primary Alerts. The state of a device's
Primary Alerts can also be read from devStatusAlert. Traps 33–78 are
Secondary Alerts with additional information on Primary Alerts (Traps 1–32).
Alarm Clearing actions per Trap:
Trap Alarm Clearing Action
1, 3–78 Automatically clears when condition improves
2 User must explicitly clear the alarm
101–117 Automatically clears when condition improves
201–278 Generates clear notification of corresponding Traps 1–78
when condition improves
Table 3-2. Mode 2 Traps (1 of 7)
Trap Trap Description
1 Device Failure
2 Configuration Change Notify
3 Test Mode
4 Disabled
5
Out of Threshold
VF Threshold Exceeded
6 Facility Alarm
7 External Alarm
September 1998
Mode 1 Traps on page 3-2.
3600 DSU 3800 Dial
6700-A2-GB20-30
3900 APL