Traps and Report Formats
Traps OIDs
Mode 1 Traps
3-2
Traps are generated for alert conditions detected by the COMSPHERE 6700
Series NMS.
The Enterprise OBJECT IDENTIFIER (OID) used in device traps in Trap Mode 1
is the following:
iso(1) org(3) dod(6) internet(1) private(4) enterprises(1)
att-2(74) att-products(1) paradyneNMS-products(13)
nms-6700-products(2) att67 devOid(2)
For Trap Mode 2, the OBJECT IDENTIFIER (OID) varies depending on the
device type generating the trap.
For dial devices, the following OID is used:
iso(1) org(3) dod(6) internet(1) private(4) enterprises(1)
att-2(74) att-products(1) paradyneNMS-products(13)
nms-6700-products(2) att67 devOid(2) att67dialOid(1)
For APL devices, the following OID is used:
iso(1) org(3) dod(6) internet(1) private(4) enterprises(1)
att-2(74) att-products(1) paradyneNMS-products(13)
nms-6700-products(2) att67 devOid(2) att67aplOid(2)
For DSU devices, the following OID is used:
iso(1) org(3) dod(6) internet(1) private(4) enterprises(1)
att-2(74) att-products(1) paradyneNMS-products(13)
nms-6700-products(2) att67 devOid(2) att67dsuOid(3)
For the NMS system, the following OID is used:
iso(1) org(3) dod(6) internet(1) private(4) enterprises(1)
att-2(74) att-products(1) paradyneNMS-products(13)
nms-6700-products(2) att67nmsOid(1)
The community name used in device product traps is the Device Read
Community. This is formed by concatenating base read community with the
device name.
The following COMSPHERE 6700 Device MIB variable bindings are included in
each trap message.
Device Name (devAdminName)
Device Type (devAdminModelType)
System Time (nmsSystemTime)
September 1998
6700-A2-GB20-30