Snmp Proxy Agent Installation; Hardware And Software Requirements; Preparing For Installation And Configuration - Paradyne COMSPHERE 6700 Series User Manual

SNMP Proxy Agent Installation

Hardware and Software Requirements

Preparing for Installation and Configuration

6700-A2-GB20-30
The SNMP Proxy Agent feature has the same hardware and software
requirements as the basic single-user NMS, except that the agent requires at
least 16 MB of RAM. Refer to the Hardware Description and Software Description
sections in Chapter 1, Introduction , of the COMSPHERE 6700 Series Network
Management System User's Guide for details.
Before installing and configuring the SNMP Proxy Agent feature, you need some
system and network information. A Winsock-compliant TCP/IP stack must be
installed on the PC, such as the one provided by Windows 95 and Windows NT.
September 1998
2
2-1