H Enabling The Communication Port - Paradyne 3166 User Manual

SDCP Operation
Enabling the Communication Port
"
3-16
Communication between the 3166 DSU/CSU and an external PC, ASCII device,
SNMP manager, or async terminal interface (attached either locally or through an
external modem) occurs through a communication (COM) port. Once the COM
port is enabled, other COM port configuration options can be selected.
Procedure
To enable the COM port:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
the screen.
5. Select User.
Edit:
Chan Gen
F1
6. Press F1 (Next) until the Com Port configuration option appears.
7. Select Enab to enable the COM port.
Com Port:
Next Enab
F1
March 1999
key until the User selection appears on
User
F3
F2
Disab
F2 F3
3166-A2-GB20-20