Table of Contents
Advertisement
Monitoring Test Patterns
"
3166-A2-GB20-20
5. From the Send screen, press the Function key that corresponds to the
interface for which you want to send a test pattern. (NET does not appear for
the 511 pattern.)
Send: Name
NET
Prt1
F1
The Test Started screen appears.
Send: Name and Dest
Test Started
F1
If the DSU/CSU is already sending the test pattern you selected, the
message Already active appears. If you select a different pattern than
one the DSU/CSU is already sending, the message Invld Test Combo
appears.
Use the Monitor command to monitor a QRSS test pattern over all the channels
on the network interface, or to monitor QRSS or 511 test patterns on the channels
allocated to an individual port.
This command provides the number of errors detected in the test pattern
(5 digits, maximum 99999).
Procedure
To monitor a QRSS or 511 test pattern:
1. From the top-level menu screen, select Test.
2. From the Test screen, select Ptrns.
Test:
Rlpbk Lpbk
F1
March 1999
F2
F3
F2
F3
Ptrns
F3
F2
Monitoring and Testing
4-27
Advertisement
Table of Contents
