Table of Contents
Advertisement
Index
P
Password Mode, C-10
pattern tests, 4-26
payload loopback (PLB), 4-21
Perf (Performance Report) branch, example of use,
4-5
performance registers
description, 4-5
resetting, 4-10
performance reporting, 4-5, C-5, C-6
physical description of DSU/CSU, 1-3– 1-5
pin assignments, D-1
Point-to-Point Protocol (PPP)
procedure for configuring, 3-23
used with SNMP system, 1-2, 3-20, F-1
Port, functional description, 1-3
PORT 1 interface
configuration options, C-2
failure message, 4-2
front panel LED indications, 3-6
pin assignments, D-3
Port Configuration branch, option table, C-2
Port LB, C-3
Port Type, C-2
power input, troubleshooting, 4-14
power-up self-test, LED behavior, 2-6
power-up self-test
displaying results, 4-1
front panel indications, 3-4
troubleshooting, 4-14
problem determination, 4-14
protocol, link layer, 3-19, 3-23
Ptrns (Test Patterns) branch, example of use, 4-26
Q
QRSS Test, 4-26
R
rate, communications port, C-13
rear panel, connectors. See connectors, rear panel
Rel (Release) branch, example of use, 3-40
remote loopback, 4-16
repeater loopback (RLB), 4-22
reset
asynchronous terminal operation, H-1
procedure, 3-41
Reset branch, example of use, 3-41
Rlpbk (Remote Loopback) branch, example of use,
4-16
RS-449 interface, D-5
IN-4
S
self-test, enabling and disabling, C-10
self-test
displaying results, 4-1
front panel indications, 3-4
troubleshooting, 4-14
Send Ones configuration option, C-3
serial crossover cable, D-11
Serial Line Internet Protocol (SLIP)
procedure for configuring, 3-23
used with SNMP system, 1-2, 3-20, F-1
SES (Severely Errored Seconds) report, 4-8
Shared Diagnostic Control Panel (SDCP),
acquiring/releasing the user interface, 3-39
SNMP (Simple Network Management Protocol)
agent, 1-2
configuration options
examples of use, 3-19, 3-27
option table, C-19
connection examples, F-1– F-6
database, 1-2
IP addressing, F-1– F-6
manager, 1-2
MIBs
functional description, E-1
list of objects, E-1
procedure for configuring access, 3-25
objects, 1-2
principles of operation, 1-2
SNMP Down message, 4-4, 4-15
traps
functional description, 1-2, 4-12
procedure for configuring, 3-27
SNMP Management
enabling and disabling, C-19
Number of Security Managers, C-19
Number of Trap Managers, C-23
System Contact, C-20
System Location, C-20
System Name, C-20
SNMP Traps, 4-12
Alarm and Trap Dial Out, C-17
enabling and disabling, C-16, C-23, C-24
enterprise-specific, 4-13
Number of Trap Managers, C-23
Trap Disconnect, C-16
Trap Manager Destination, C-23
Trap Manager IP Address, C-23
March 1999
3166-A2-GB20-20
Advertisement
Table of Contents
