Releasing The Active User Interface - Paradyne 3166 User Manual

SDCP Operation

Releasing the Active User Interface

"
3-40
The inactive interface displays an interface idle message after control has been
released from the previously active interface and another interface has not
become active.
DSU ESF
Com Port idle
F1 F2
To release the current active user interface, either allow five minutes to elapse
without pressing any key or use the Release command.
Procedure
To use the Release command:
1. From the top-level menu screen, press the
appears on the screen.
2. Select Ctrl.
3. From the Control screen, select Rel (Release).
Control:
Call Rel
F1
The active user interface is released. The message Released appears. No
user interface is active until input is received from a user interface.
March 1999
F3
LED
F2 F3
key until the Ctrl selection
3166-A2-GB20-20