Aborting Test Patterns - Paradyne 3166 User Manual

Monitoring and Testing

Aborting Test Patterns

"
4-28
3. From the Patterns screen, select Mon.
Patterns:
Abort Send
F1
4. From the Patterns Mon screen, press F1 for QRSS or F2 for 511.
Patterns: Mon
QRSS 511
F1
5. From the Monitor screen, press the Function key that corresponds to the
interface for which you want to send a test pattern. (NET does not appear for
the 511 pattern.)
Monitor: Name
NET Prt1
F1
The Monitor screen appears with the error count. If the maximum of 99999 is
exceeded, OvrFlw appears instead of the count. If the receiver loses
synchronization while the monitor is active, No Sync appears.
Use the Abort command to stop all test patterns or any selected test pattern
active on the DSU/CSU.
Procedure
To abort test patterns:
1. From the top-level menu screen, select Test.
2. From the Test screen, select Ptrns.
Test:
Rlpbk Lpbk
F1
March 1999
Mon
F2 F3
F2 F3
F3
F2
Ptrns
F2 F3
3166-A2-GB20-20