Setting The Ip Address - Paradyne 3166 User Manual

Setting the IP Address

"
3166-A2-GB20-20
The IP address is the address used by the SNMP or Telnet system to access the
DSU/CSU (see Appendix F,
using PPP, the IP address can be negotiated if the network device (e.g., router or
SNMP manager) supports such negotiation. The IP address is composed of four
fields with three digits per field ( xxx.xxx.xxx.xxx ).
The example below assumes that an IP address of 010.155.111.222 is being set
for the COM port. You can use the same principles to assign any value (between
000 and 255 for each digit field).
Procedure
To assign an IP address to the COM port:
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied into the Edit area by using the
appropriate Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
the screen.
5. Select Mgmt.
Edit:
User Alarm Mgmt
F1
6. From the Mgmt Config screen, select Gen.
Mgmt Config:
Gen Trap
F1
7. Press F1 (Next) until the Com IP Adr configuration option appears.
March 1999
IP Network Addressing Scenarios
key until the Mgmt selection appears on
F2 F3
F2 F3
SDCP Operation
). For DSU/CSUs
3-21