Table of Contents
Advertisement
Setting a Password
"
3166-A2-GB20-20
In addition to establishing access security on a port (refer to the previous section,
Establishing Access Security on the COM Port
you specify otherwise, the password is null.
Procedure
To set a password:
1. From the top-level menu screen, press the
appears on the screen.
2. Select Ctrl.
3. From the Control screen, press the
appears on the screen.
4. Select Passwd.
Control:
Reset CID
F1
5. Use the
and
You must enter a character before the
space to the right.
Passwd: xxxxxxxx
Up
Down
F1
6. Enter the desired password. Press F1 (Up) and F2 (Down) to scroll up and
down through the valid characters/numbers for the password. Valid password
characters are 0–9, a–z, A–Z, #, –, ., and /. Press F3 (Save) to save the
password.
Passwd: xxxxxxxx
Up
Down
F1
March 1999
) the password itself is set. Unless
key until the Passwd selection
Passwd
F3
F2
keys to position the cursor under the desired character.
moves the cursor to the next
Save
F2
F3
Save
F2
F3
SDCP Operation
key until the Ctrl selection
3-37
Advertisement
Table of Contents
