Table of Contents
Advertisement
Configuration Options
C-22
Table C-6. General Management Configuration Options (4 of 4)
Com NetMask:
Next
Edit
Clear
Prev
Subnet Mask for the Communication Port. Specifies the subnet mask for the
communication port if the Com Use configuration option is set to Mgmt.
Edit – Allows you to edit and/or display the subnet mask for the communication port.
Clear – Allows you to clear the subnet mask for the communication port. The subnet
mask is set to 000.000.000.000. If the subnet mask is 000.000.000.000, the IP protocol
creates a default subnet mask based on the class of the IP address (Class A:
255.000.000.000, Class B: 255.255.000.000, or Class C: 255.255.255.000).
NOTE:
This configuration option is not available if the communication port is
disabled.
Com Link: PPP
Next
PPP
SLIP
Prev
Com Port Link Layer Protocol. Specifies the link layer protocol for the communication
port if the Com Use configuration option is set to Mgmt.
PPP – Specifies PPP as the link layer protocol for the IP management link on the
communication port.
SLIP – Specifies SLIP as the link layer protocol for the IP management link on the
communication port. The communication port must be configured for asynchronous
operation to support SLIP.
NOTE:
This configuration option is not available if the communication port is
disabled.
March 1999
3166-A2-GB20-20
Advertisement
Table of Contents
