Table of Contents
Advertisement
Replay Function
In SiriusXM mode, you can pause, rewind and replay live Satellite Radio.
Replay mode screen example
Buffer usage
Current Replay point
Replay status indicator ( or
Replay range
Time to live
1
Touch [
] to Pause playing of the channel content.
The "
(Pause)" indicator and replay progress bar is displayed.
2
Touch [
] again to resume playing the content.
The "
(Play)" indicator lights up and offset playback
commences.
3
Touch [
] (Live) to exit Instant Replay and listen to
live content.
• To fast reverse, touch and hold [
hold [
].
• Touching [
] or [
] will move a track up/down.
• If you change channels while in Replay mode, the contents of the replay
buffer are emptied.
• The allowed recording time differs depending on the SiriusXM Tuner
box.
Parental Lock Function
The Parental Control feature allows you to limit access to any SiriusXM
channels, including those with mature content. When enabled, the
Parental Control feature requires you to enter a passcode to tune to the
locked channels. For information on setting the Parental Control
passcode, see "Setting the Parental Lock" (page 43).
When a locked channel is selected, "Channel <xxx> Locked" is displayed
and then the numeric keypad appears for you to enter the passcode.
Input the 4-digit passcode you set in "Setting the Parental
Lock" (page 43).
The initial number is 0000.
• If you input a wrong passcode, "Incorrect Pass Code entered" is
displayed.
• After entering the correct passcode, you can access all locked channels
without entering the passcode again until the unit is powered off and
then back on.
68
-EN
)
] and to fast forward, touch and
Using Jump Memory and Jump Recall function
The Jump Channel is a special channel that you can jump to with the
press of a dedicated button and then jump back to the previous channel.
This channel is often used to select your favorite SiriusXM traffic and
weather report channel.
1
To store the Jump channel in memory, touch and hold
[
] (Jump) for at least 2 seconds.
2
Touch [
] (Jump) to recall and tune to the saved Jump
channel.
3
Touch [
] (Jump) again to receive the previous
channel.
• While receiving the Jump channel, you cannot perform other
operations.
• Only one channel can be stored as the jump source channel. When you
want to store a new channel, the old channel will be cleared and the new
one will be stored.
Advertisement
Chapters
Table of Contents
