Table of Contents
Advertisement
Setting the Parental Lock
You can lock out channels with passcode protection. Channels that are
locked cannot be accessed without entering the passcode. You can
unlock a channel or change the passcode using this menu option.
Setting item:
Parental Lock
1
Touch [Parental Lock].
A passcode input screen is displayed.
2
Touch the numeric keypad to input a 4-digit passcode.
The initial default 4-digit passcode is set to 0000.
After entering the digit, it is displayed as "*" (asterisk).
• Touch [
] to delete an entered number.
• Touch [Delete All] to delete all entered numbers.
3
Touch [Enter].
Setting the Lock status of individual channels
4
Touch [Locked Channels].
The channels list screen is displayed.
5
Touch the checkboxes "On" (
channels list to set the Parent Lock Off/On.
Clearing the Lock of ALL the locked Channels
4
Touch [Clear All Locked Channels].
5
Touch [OK] to clear the lock of all the locked channels.
Touch [Cancel] to cancel.
Changing the Lock Passcode
4
Touch [Edit Code].
The numeric keypad screen is displayed.
5
Use the keypad to enter the current (old) 4-digit
passcode.
The initial passcode is set to 0000.
• Touch [
] to delete an entered number.
• Touch [Delete All] to delete all entered numbers.
6
Touch [Enter] to confirm the entry.
7
Now use the keypad to enter the new 4-digit passcode.
8
Touch [Enter].
9
Then use the keypad to enter the new 4-digit passcode a
second time to verify it.
10
Touch [Enter].
• Remember to keep a note of the passcode in a safe place in case you
forget the code.
) or "Off" (
) of the
Signal Strength Information
While listening to a SiriusXM Channel, the Signal strength of the
current channel will be displayed.
Setting item:
Signal Indicator
This menu item displays the SiriusXM signal strength as Strong, Good,
Weak or No Signal.
• If the Signal Indicator reports Weak or No Signal and your vehicle is
parked outside with no obstructions to the southern sky, then your
SiriusXM antenna may not be properly installed or may have become
damaged.
AUX Setup
[AUX] is selected on the Source Setup Menu screen in step 1. See
"Source Setup" (page 41).
You can set up the items related to the Auxiliary device.
Setting item:
AUX
Setting contents:
Off / On (Initial setting)
Off:
AUX source is not displayed.
On:
AUX source is displayed.
Usable 4-pole mini AV plug
The unit accepts the following 4-pole mini AV plug pin-out:
Audio L (White)
Audio R (Red)
Ground
Video (Yellow)
• Please check pin-out carefully before use of this product. Depending on
the cable, there may be no picture and/or sound.
Setting the Auxiliary (AUX) Name
Make sure the AUX is set to "On" (
Setting item:
AUX Name
Setting contents:
AUX (Initial setting) / AUX DVD / GAME / External DVD / DVD Changer* /
DVB-T* / TV*
* Not used for this unit.
). See "AUX Setup" (page 43).
43
-EN
Advertisement
Chapters
Table of Contents
