Table of Contents
Advertisement
4.3.1.1 Vehicle profile
You can select the following vehicle types:
Button
Creating a profile makes it possible to set up vehicle parameters used in route planning. You can
have several profiles for the same vehicle.
To add a new vehicle profile, perform the following steps:
1.
Tap
2.
Select the vehicle type and set the parameters below. Depending on the vehicle type, some
parameters may not be available in the list.
You can set the following parameters:
Button
Maneuver restrictions and directional constraints are taken into account when
planning a route.
Roads are used only if access for cars is allowed.
Private roads and resident-only roads are used only if they are inevitable to
reach the destination.
Walkways are excluded from routes.
All maneuvers are available in intersections.
One-way streets are taken into account so that driving in the opposite direction
is allowed at low speed.
A private road is used only if the destination is there.
Walkways are excluded from routes.
Maneuver restrictions and one-way streets are taken into account when
planning a route.
Roads are used only if access for buses is allowed.
Private roads, resident-only roads and walkways are excluded from routes.
Maneuver restrictions and one-way streets are taken into account when
planning a route.
Roads are used only if access for taxis is allowed.
Private roads, resident-only roads and walkways are excluded from routes.
Maneuver restrictions and one-way streets are taken into account when
planning a route.
Roads are used only if access for trucks is allowed.
Private roads, resident-only roads and walkways are excluded from routes.
U-turns are excluded from routes (turning back on a divided road is not
considered as a U-turn).
If the map contains data on dimension, weight and freight restrictions, they can
also be taken into account when planning a route.
, browse the list of vehicles, and tap
Description
Function
73
.
Advertisement
Chapters
Table of Contents
