Getting Started - Alpine X409-WRA-JK Installation Manual

Owner's manual Location of Controls, Turning Power On or Off
=:__J
Getting Started
Location of Controls
The screen design used in the Owner's Manual may differ from the actual screen.
For X308U/INE-W987HD
G)
Microphone (X308U/INE-W987HD only)
Used for Hands-free or Voice Control modes.
@
J>
(AUDIO) button
Displays the AudioNisual screen. If the AudioNisual
screen is already displayed, changes the source.
@
for VOICE button
Depending on the connected smartphone, press to
recall Siri function or voice recognition mode.
@
+/-or
A/ V
(UP/DOWN) button
Press to adjust the volume.
®
*
(Favorite) button
Recalls the Favorite screen.
• Press and hold this button for at least 2 seconds to
switch to the iDatalink mode screen. (When
connected to the optional iDatalink module.)
®
MENU/ (Power Off) button
Recalls the Menu screen.
4 -EN
Press and hold this button for at least 5 seconds to turn
the power off.
ForX409
0
~/..,..button
Press to seek down/up a station in radio mode or
down/up a track, chapter, etc., in other audio/visual
sources.
@
RESET switch
The system of this unit is reset.
@
@(NAV)button
Recalls the navigation map screen.
Press again to switch to Navigation menu screen.
Press and hold this button for at least 2 seconds to
change to Go Home route screen. (If Home is not set
yet, it will change to the Home setting screen.)
For details of navigation operations, refer to "Navigation
System OM"in the website at
http://www.alpine-usa.com.
@)
Remote Sensor
Point the remote control transmitter towards the
remote sensor within a range of 2 meters.
~ (CAMERA) button (X409 only)
Recalls the camera image screen.