Table of Contents
Advertisement
Checking and Setting the Fresh Duct
discharge temperature
In order to check and set the Fresh Duct discharge temperature
using the wired remote controller, hold down the
buttons at the same time for 5 seconds.
1
The menu will display .
Press the
button until
2
Press the
button.
The Fresh Duct discharge temperature will be displayed.
Cool Discharge Temp. : 15°C ~ 25°C
Heat Discharge Temp. : 18°C ~ 30°C
3
Press the
Fresh Duct discharge temperature.
4
Press the
button.
Wired remote controller sends data to Fresh Duct.
5
Press the
button to exit.
You will move to the menu selection display.
Note
Press the
without setting.
Fresh Duct discharge temperature will not be applied if
you don't press the
is displayed.
buttons and the
button to set the
button anytime during setup to exit
button.
and
Menu No.
Cool discharge
temperature
Heat discharge
temperature
31
E-
Advertisement
Table of Contents
