Table of Contents
Advertisement
Checking the External Control Usage
In order to check the external control usage using the wired
remote controller, hold down the
same time for 5 seconds.
1
The menu will display .
Press the
button until
2
Press the
button.
The external control usage will be displayed.
Value
Use (Indoor unit Dip switch K11: Off)
Not Use (Indoor unit Dip switch K11: On(default))
3
Press the
button to exit.
You will move to the menu selection display.
Note
Press the
twithout setting.
and
buttons at the
is displayed.
Data
button anytime during setup to exit
Menu No.
Set value
27
E-
Advertisement
Table of Contents
