Checking And Setting The Indoor Unit Main/Group Address - Samsung MWR-WH02 Installation Manual

Additional Functions (Continued)
Menu No.
Checking the Indoor unit
Indoor unit RMC address
main address
Setting the
Indoor unit
main address
16
E-
Checking and Setting the Indoor Unit Main/
Group Address
In order to check and set the indoor unit Main/Group Address
using the wired remote controller, hold down the
buttons at the same time for 5 seconds.
1 The menu will display .
Press the button and the menu will display .
2
Press the button.
The main address (decimal notation) and group address
(hexadecimal notation) of currently set indoor unit will be
displayed.
3 Press the
indoor unit Main/Group Address.
Press the button.
4
Wired remote controller sends data to an indoor unit.
5 Press the button to exit.
You will move to the menu selection display.
Note Press the
without setting.
Setting main/group address of an indoor unit is
available only with a Main wired remote controller.
buttons and the button to set the
button anytime during setup to exit
and