Wired remote controller and Accessories
Accessories
The following accessories are supplied with the air conditioner.
The number of each accessory is indicated in parentheses.
Cable Tie (2)
Communication cable
for indoor unit (1)
The wired remote controller should be installed by a trained installer.
Make sure the main power is off before installing the wired remote
controller.
The cables must be installed according to the national wiring
regulations and inside the wall for safety reasons.
Dimension
4
E-
Cable Clamp(4)
M4X16 Screw(5)
Wire joint (4)
User's manual(1)
Power cable for
indoor unit (1)
Installation manual(1)
10m Connecting
(Unit : mm)
wire (1)