Indoor Temperature Checking Function; Blade Selection Function - Samsung MWR-WE13N User Manual

Indoor temperature checking function

Use this function to check the current indoor temperature.
In operation
NOTE
3 seconds after displaying the indoor temperature, the set
temperature appears.
Indoor unit temperature is displayed by 0.5 °C units.
Depending on the installation location of your wired remote
controller, the current indoor temperature can be different.
If the temperature display setting is set to indoor temperature and
you press the button, then the

Blade selection function

Use the individual air-flow-direction control function to individually
control the air flow directions of the air outlets.
In operation
Each time you press the
.
NOTE
Depending on the individual setting, a different blade could be
selected.
The blade that can be selected may differ depending on the model.
If the indoor unit is turned off or does not support the Blade
selection function, the
the button.
indicator appears.
button, it will toggle between
indicator appears when you press
English 19