Table of Contents
Advertisement
Additional Functions (Continued)
Menu No.
Indoor unit
ERV
quantity
quantity
28
E-
Checking the Connected Indoor Unit/ERV
Quantity
In order to check the connected indoor unit/ERV quantity using
the wired remote controller, hold down the
buttons at the same time for 5 seconds.
1
The menu will display .
Press the
button until
2
Press the
button.
The total quantity of connected indoor unit/ERV will be
displayed.
Note
Indoor unit+ERV quantity: 1~16 units
3
Press the
button to exit.
You will move to the menu selection display.
Note
Press the
without setting.
The ERV cannot be connected to the wired remote
controller without an indoor unit.
At least one indoor unit must be connected to the
wired remote controller.
and
is displayed.
button anytime during setup to exit
Advertisement
Table of Contents
