Setting The Wired Remote Control Options; Wired Remote Control Error Codes - Samsung MWR-SH00 Installation Manual

Installing the Wired Remote Control (Continued)
 Default setting
SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8
1 2 3 4 5 6 7 8
DIP 601
Display
6
E-
DB98-28133A-05_IM_SIMPLE Wired Remote_EU_EN_.indd 6

Setting the Wired Remote Control Options

Switch
No.
SW1 Cooling and Heating
SW2 Temp. display : °C
Allow wireless remote
SW3
control
SW4 Auto mode enable
SW5 Mode lock enable
SW6
SW7
SW8 Main remote control

Wired Remote Control Error Codes

1
The error codes of the indoor and outdoor units are displayed
on the wired remote control. Refer to the indoor and
outdoor unit technical manuals for the error codes reference.
2 The following error codes are related to the wired remote
control.
Explanation
Wired remote control  Indoor unit
communication error
Main  Sub wired remote control
communication error
Communication packet error
Wired remote control tracking error
No indoor units found
7 Day scheduler error
COM1/COM2 installation error
COM2 dual main error
Excessive indoor unit installation error
Temperature units (Celsius/Fahrenheit)
mixed setting error of installed indoor units
Temperature units (Celsius/Fahrenheit)
setting error
Main/Sub DIP option setting error
Switch OFF
Cooling Only
Temp. display : °F
Disable the wireless remote
control
Auto mode disable
Mode lock disable
-
-
Sub remote control
When using 2 wired remote
controls to control one indoor unit.
Switch ON
-
-
Remark
-
-
-
-
-
-
-
-
-
-
2020-09-28 오후 1:42:34